I got my kid an electric go Kart which was supposed to be pretty cool. It's not bad but we're having issues with turns... Going right is fine, going left causes the chassis to raise the front left which therefore loses grip and it barely turns that way... Right good, left bad.. I measured a few things, adjusted pressures, took the wheels off and moved shims around, it's better and usable now but not perfect...
You might get what I mean in that crappy video... Full lock left, the front of the kart goes up and the left wheel almost is off the ground.
https://youtu.be/O7_bhud9JbA
On this picture the orange arrows show the direction of turn, the wheel movement, the blue one shows the part responsible... There were 3 shims above it, 2 below (not the same as the other side). I experimented a lot and it worls better with all the shims below it... If you disconnect the steering and simply move that front right wheel (on your left) the front of the kart moves up when it reaches close to full lock... 3/4 turns no problem, but full lock the think moves up 1/4 inch which makes the other wheel lose grip...
Go ahead, humble me, what else can I do to fix this... Thanks !!!