Quote:
Originally Posted by Reiver
A 'for' viewpoint.....I've had a two backfires (before I put my AFR gauge in) due to lean conditions and the pop off saved the box from any major damage. The one big one dented the mesh on the filter (from the pop off lid).
It may be there is an issue somewhere but I can set the idle to 500 rpm and it spins smoothly...and when set at 900 rpm the CIS works perfectly (the AFR tells me so)....
Everything works as it should...so...?
|
But have you checked the screws, especially the ones next to the ridges inside? If you can't tighten them, the box is split.