View Single Post
rfuerst911sc rfuerst911sc is online now
Registered
 
rfuerst911sc's Avatar
 
Join Date: Dec 2002
Location: Dahlonega , Georgia
Posts: 15,221
My man cave build

Hello everyone I have a couple of topics running regarding various items for a garage I'm building . I thought I would start one post to document the build in hopes that some info can help others . I am starting with this 24 x 28 pole barn had it installed a few months ago . It has 12 ' tall walls and is now prepped for the concrete pour . That will happen the week after Thanksgiving . It is framed up for a 5.5 " thick floor with two areas aprox. 36 x 36 that are 9 " deep that is where the two post lift will be installed .

I have been driving on the dirt for two months plus with my garden tractor and my dually to pack that red GA. clay down . Did a final grading and pulled in some # 57 gravel . Spread that out and then covered with 6 mil vapor barrier . Sent pics to my concrete guy he was happy with it just gotta wait until after the holiday.

I already purchased a used Ammco two post lift she's waiting to be installed . And I also purchased a Mitsubishi mini split to heat/cool the space . I will install radiant barrier under the rafters forming a 3.5 " air space and will have vented soffits the full length on both sides . Already have a full length ridge vent with the metal roof . I'm pretty sure I will go with metal ceiling and a good 6 - 8 inches of insulation . Walls will be 2 x 6 . Pretty sure I will go with a 18 ' wide x 10 ' tall insulated garage door . No windows in the garage and there will be one 36 " entry door.

Two concrete pads will be poured on the back of the garage on the perimeter of the floor , one pad will be for the air compressor and one for the mini split . The air compressor will be framed in but will be " outside " of the interior space to keep the noise down . Other than the concrete and the electrical I plan on doing the majority of the work myself as I am officially retired as of 12/1/17 !

Interior cabinets will be the Gladiator cabinets I previously had installed in the garage of the house we recently sold . They were almost 3K and I was NOT going to leave them behind ! Lighting I'm leaning towards LED track lights I also had those in the other garage and liked them a lot . I also pulled from the other garage three wall mounted adjustable fans for when the AC/heat are not needed . Sorry for the long post but wanted to get the basic story out there . Hopefully others can benefit or at least enjoy the build Here are two pics to kick things off .


__________________
2002 Boxster S . Arctic silver + black top/int. Jake Raby 3.6 SS engine " the beast ". GT3 front bumper, GT3 side skirts and GT3 TEK rear diffuser. 1999 996 C4 coupe black/grey with FSI 3.8 engine . Rear diffuser , front spoiler lip with ducktail spoiler .
Old 11-19-2017, 06:58 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)