|
Senior Member
Join Date: Jun 2000
Location: N. Phoenix AZ USA
Posts: 28,977
|
Keith,
Its a standard 13 or 14mm deep socket to take it out. To install the new one go to a pawn shop or flea market and buy one just like it that you do not mind grinding on a bit. Take it home and grind a notch in it so you can fit the wire inside and then slightly tighten it down.
The real bear on my car (with SSI's) was getting to the puppy in the first place. Put the car up on jack stands and go through the LH rear wheel well.
Joe
__________________
2021 Subaru Legacy, 2002 Dodge Ram 2500 Cummins (the workhorse), 1992 Jaguar XJ S-3 V-12 VDP (one of only 100 examples made), 1969 Jaguar XJ (been in the family since new), 1985 911 Targa backdated to 1973 RS specs with a 3.6 shoehorned in the back, 1959 Austin Healey Sprite (former SCCA H-Prod), 1995 BMW R1100RSL, 1971 & '72 BMW R75/5 "Toaster," Ural Tourist w/sidecar, 1949 Aeronca Sedan / QB
|