|
Registered
Join Date: Dec 2002
Location: Dahlonega , Georgia
Posts: 15,217
|
I currently am elbows deep in a 24 x 28 pole barn . Here is what I am doing . Had the pole barn installed about 6 months ago . Had the concrete floor poured about 3 weeks ago . Have been studding up the walls with 2 x 6's that is now done . My roof trusses are about 5 ' spacing . I am going to staple reflective barrier under the roof trusses under the decking . I will install metal roof panels to the bottom of the trusses to make the finished ceiling . Will install kraft paper insulation on top of the ceiling panels as the vapor barrier , then will blow in an additional 6 - 8 inches of insulation .
My pole barn/garage will have a mini split AC/heat so walls will be insulated R19 and 1/2 " CDX installed inside and out . Have not decided on final exterior siding but leaning towards metal roof panels . The metal panels make a great ceiling , no taping no painting and is strong enough to bridge 5 ' to 8 ' truss spans . When using white panels they also reflect light very well . Hope some of this info helps good luck .
__________________
2002 Boxster S . Arctic silver + black top/int. Jake Raby 3.6 SS engine " the beast ". GT3 front bumper, GT3 side skirts and GT3 TEK rear diffuser. 1999 996 C4 coupe black/grey with FSI 3.8 engine . Rear diffuser , front spoiler lip with ducktail spoiler .
|