|
1967 S Cam distributor recurving
Hi,
Following on from a previous post, I am having my Bosch distributor from a 2.4T 1973 recurved to work with 1967 S cams, matched with 90mm cylinders and 10.5:1 high comp pistons, 2.4 crank, ported cylinder heads and a Zenith carb with 34mm venturis, 145 main jets, 60 idle and 185 air jets.
I didn't mention in my earlier post that the S cams were from a 1967. Will the distributor part number 0 231 169 008 work ok with these cams and is it it still the case that the recurve should be set at 28 to 30 degrees BTDC@6000 with no vacuum attached.
Thanks in advance.
Rob.
|