[TurboKraft]

Hi Van,
Nice Garrettson IC! That uses an 8" length (fore-aft) core, so it can exit nearly vertically into a 930 manifold.
TurboKraft intercoolers are usually 12" so we use a 3" diameter tube out of the intercooler into the throttle body. It's a "U" shaped tube on the 3.2 manifold setups, and a "S" for the flat manifold. Using an outlet tube lets us mount all accessories in it -- air temp sensor, idle motor port, blow off valve, etc.

Sorting through 1,000+ photos from a recent project, sure to have a good on in the back of the IC outlet pipe. Will post it here.

Fred -- we can put the BOV most anywhere along that outlet tube, or, leave it off for you to add on (TIG weld the flange locally).