|
If I touch to two probes attached to my multifunction meter together, I get 0.1 ohm. If I use the push pins to contact the one of the 2 ground wires near the headlight flasher plug and one of the three ground wires connected to the lug, I get 0.4 ohms. I get this same reading with each of the 2 ground wires near the lug, but the other wire is just in too tight a spot to get a measurement.
Am I supposed to get "0.0 ohm" reading or is the value I get (0.4 ohm) too high?
__________________
Steve B.
1972 911t
1999 328is
|