|
my thoughts are....
if there are small holes, then surface rust may be accumulating on the opposite side of the sheet metal.
But I would think you could do a couple of things still... spray the area with some rust inhibitor (I think Eastwood sells some nice products)... and/or seal up the area with some JB Weld (if it's good enough to seal an engine case, it should be good enough for this)... you'll have to let it harden and then sand it back to proper shape.
Nonetheless... you will at least repair the area for now... but without physically removing the sheet metal, there is a chance that rust will come back in a few years.
__________________
1987 Porsche 911 Carrera Coupe
|