Quote:
Originally Posted by Flat6pac
Yes, but you have to be conscious about not moving any of the heads because you have 18 studs that need to be lined up to replace cam carriers.
Bruce
|
You wouldn't need to worry about lining anything up because leaving the heads torqued without the cam towers on, then ONLY torquing down the cam tower is 100% the wrong way to do it.
If OP does this, he must do his tests with the heads torqued, THEN loosen the head bolts. Then, replace and torque the cam towers, and finally, torque the head bolts once again.
Cam towers are ALWAYS torqued before the head bolts. So if you loosen the cam towers......