Quote:
Originally Posted by antares
Let's see for just a quick reality check for materials cost
. If going to bare metal and doing it yourself assuming you have a primer gun and a good spray gun or other wise add $ 600 to the bottom line totals and add about
$ 1,200 for a good used real 5 h.p. 12 to 17 cfm compressor with at least 65 gallon tank if you do not already have one plus add for hobby breathable fresh air supply unit $ 360 plus paint suit and hood $ 150 and $ 24.84 for pain relievers :
Now for the basics:
Sand Paper Stock Pile of all types and sizes @ $ 1.00/sheet
. $ 200
Aircraft paint stripper
$ 100
SPI ( Souther Polyurethanes, Inc ) epoxy primer
. $ 300 for 2 gallons
H.O.K. ( House of Kolor ) urethane high build primer
$ 250 for 1 gallon plus qt
Single Stage Urethane 1-gallon plus qt $ 300 to $ 650 depending on mfr flavor chosen
or
Base Coat/Clear Coat
2-gallons plut qt $400- $ 800 depending on mfr flavor chosen
Cutting & Buffing Suplies
. $ 200
Tarps and Booth Creation
. $ 250
Painting Jack Stands
. $ 350
Exhaust Fan System/Ventilation/Filtration
. $ 650
Miscellaneous: Rage filler, 3M Top Fairing Putty Cream,
. plus crap n crap
.. $ 450
Guest-a-mat Amount : $ 3k to 4k or so
.. less if your squeaky
more if your leaky - uncle dave
|
Bought ingersoll rand t30 compressor used for $110. It is 80 gal tank.