|
Under the radar
Join Date: May 2007
Location: Fortuna, CA. On the Lost Coast near the Emerald Triangle
Posts: 7,129
|
As long as you remove the loose rust, properly treat and seal the area, then make sure it stays dry, you are good to go. I did repairs similar to this THIRTY years ago, and have not had any problems with those areas since....
In worse areas on my car, yes, I did the cut and replace dance.
Don't forget the new metal needs to be treated and sealed as well on the back side.
__________________
Gordon
___________________________________
'71 911 Coupe 3,0L outlawed
#56 PCA Redwood Region, GGR, NASA, Speed SF
Trackrash's Garage :: My Garage
Last edited by Trackrash; 03-03-2018 at 04:32 PM..
|