Quote:
Originally Posted by javadog
Skimcoat the walls with drywall mud
|
I worked with "EasySand 45" before for skim coating.
(less than 45min dry time though. It first has to absorb all water, and then gives about 15min work time by adding a few drops more water)
(There is also slower EasySand 90 if you have a lot to do and wont return for a while)
Use a 12in trowel and 14in square trough.
Stir/mix with 4in spackle blade. Go slowly at first so the powder doesn't fly everywhere.
Make a very soupy batter first and then add a little more with a solo cup scoop.
Scrap sides on angle and keep all the mix together and wet.
Always stay below surface and feather edges.
Use wet mixture to finish coat.
Use a couple sweeps. Don't overwork the surface because air bubbles and ripples will happen.