[al lkosmal]

Rick,
The part that Bernie provided is a diode, not a resistor.. this diode should be installed to correct the run-on condition, per my previous email.

However, first you need to fix the Alt light, alt charge indication/alt excitation issue....that is still a resistance/current problem methinks.

1, get the proper resistor, per the previous email (91 Ohms, 5 Watts or close)
2. attach it in parallel with the LED wires

( parallel........I.E. across the LED wires.)


once you get the proper resistance across the LED, the current will be enough tp trigger the alternator excitation.

After that is complete, if you have a run-on problem, you can apply the diode to fix that too.