View Single Post
7783911 7783911 is offline
Registered
 
7783911's Avatar
 
Join Date: Mar 2015
Location: ontario canada
Posts: 2,274
Garage
Adding a Voltmeter

I have had a few issues over the years with Battery charging and finally replaced the battery...but being somewhat paranoid/anal,

I checked for parasitic leaks and found none..so far so good
I tested at the battery and voltage is good (engine off)
I started the car and at an idle of 850 I dont show any increase in voltage across the terminal, but if i increase engine revs (say 2K) I do see in increase in voltage indicating charging?

My question is twofold

1 should charging being occurring at idle and if so, then what would i test next to determine why i am not getting charging at idle. How do i test output at the alternator (belt is nice and tight so thats not a culprit). Pictures of how to test at alternator greatly appreciated!

2 I would like to install this voltemeter/USB combination in my central console




what are the best wires to use or should I just run new wires direct from Battey Posts>


Thanks for your help
Old 03-24-2018, 07:16 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #1 (permalink)