The front wheel bearings come with the outer race as a set. However the outer race is not captured so is removable from the bearing.
The outer races will be a press fit into the hubs. Since the front hubs are aluminum, heat them in an oven to around 375* and the races should just about fall out. You need to be very careful when R&Ring the outer races as it is easy to damage the aluminum hubs.
There is a DIY article about this here.
https://www.pelicanparts.com/techarticles/Porsche_911/SUSPEN-Front_Wheel_Bearing_Replacement/SUSPEN-Front_Wheel_Bearing_Replacement.htm
__________________
Gordon
___________________________________
'71 911 Coupe 3,0L
outlawed
#56 PCA Redwood Region, GGR, NASA, Speed SF
Trackrash's Garage :: My Garage