[mgatepi]

Hello All,

I am attempting to start my BMW 1990, 325I after being stored away for the winter. (I know wrong forum, but this forum is much more frequented than the BMW forum) The car cranks over no problem. I thought perhaps the plugs were fouled so I installed a new set....still no good. After numerous attempts I pulled a couple of the new plugs out and they are dry...dry as dry can be. So I am thinking no fuel, I loosened the fuel line going into the regulator and rail and there is pressure and fuel there.
So....what is going on? How can I have fuel at the injector rail and none in the cylinders?
What do I need to check??

Any input is highly appreciated!!!
Thanks!!!
mg