|
Banned but not out, yet..
Join Date: Jan 2003
Location: "Apple Maggot Quarantine Area', WA.
Posts: 6,422
|
Resolution recap. Per Al, a resistor (10 Ohm, 5 Volts) and the above Porsche diode were added in parallel with the LED. (Original suggestion was 90 Ohm, but was able to precisely measure required resistance using a device which allowed me to dial in resistance and then measure it.
Now at start up the G Alternator LED immediately goes off and the Volts are at 14 with no throttle input and 14.5 with. All is good. Thanks to everyone for their input.
__________________
An air cooled refrigerator. ‘Mein Teil’
|