|
How it's done:
Easiest solution install an inexpensive Double din, bypass the factory Bose amp by pulling it out (likely in the rear panels), and tapping into the wiring on the output side of the amp- run the new wires to the dash. Slam new drivers in the front (6.5") if you're cheap, or in all 4 corners- rear doors (should be 5.25)
Don't even bother with the factory bose speakers. Sell the factory bose amp, it's garbage and even if you manage to get signal to it, it's gonna be rolled off (no bass) so it's gonna sound like poo.
Find the wires on the output side of the amp going to the speakers in question by measuring impedance with a VOM, then 'pop" them with a 9V battery. observe the speaker movement to verify polarity.
I repeat, don't waste your time trying to save teh Bose stuff.
You can DIY it yourself in a few hours.
rjp
__________________
In the movies only bad guys sleep in king size beds.
|