|
Also for your real question. Its pretty straight forwards you just need the rotary hammer and the bit. No pilot hole. Dont put any downward pressure on the drill, it needs to bounce.
The most important thing is to be OCD about cleaning the holes, particularly if you are using epoxy set anchors. I managed to find an appropriate sized stiff wire brush. The cleaning and vacuuming is the worst part.
It is best to have a template to drill thorough. I just left the posts standing to do this. I heard some stories about excessive walking if you try to do it freeform. Each hole takes less than 1 min with the rotary hammer. I used a Bosch Bulldog bit
__________________
84 930
18 Cayman GTS
|