Parts Needed \ WTB

[rywats]

Anyone have an extra SC / Carerra front Valence around? Vancouver area?

[Hugo 911]

Good day everyone;

looking for;
- oil cooler hard line for a 74-89 911
- front valance (bumper apron) without fog light hole
- 16x7/8 or 16x8/9 wheel (no fuchs)

Regards

Hugo

[avville]

Salut Hugo,
Si tu n'as pas encore trouvé, il y a Randy Mayer chez Whaletail porsche parts ontario qui offre le kit de lignes à l'huile rigide pour $1000.

Joyeuses fêtes!
Alain

[Hugo 911]

Originally Posted by avville

Salut Hugo,
Si tu n'as pas encore trouvé, il y a Randy Mayer chez Whaletail porsche parts ontario qui offre le kit de lignes à l'huile rigide pour $1000.

Joyeuses fêtes!
Alain

Merci,
c'est mon option si je ne trouve pas localement, il aurait la valance aussi.

[davis911s]

Anyone have a wrecked pair of H1 headlights? I would like to get some of the screws , or I may have to get some made

[1990C4S]

Anybody have a scavenge tube from a 3.2? The line from the bottom of the engine (under the exhaust) to the flex oil line.

[avville]

TROUVÉ MERCI. Salut, looking for a dash facia number 3. The one on right side of steering colum. Merci.

[pors1968]

Originally Posted by Hugo 911

Good day everyone;

looking for;
- oil cooler hard line for a 74-89 911
- front valance (bumper apron) without fog light hole
- 16x7/8 or 16x8/9 wheel (no fuchs)

Regards

Hugo

Valance avant 74-77 no fog hole

[Hugo 911]

Originally Posted by Hugo 911

Good day everyone;
looking for;

- oil cooler hard line for a 74-89 911
- front valance (bumper apron) without fog light hole ; found. thank pors1968!
- 16x7/8 or 16x8/9 wheel (no fuchs)

Regards

Hugo

front valance found, thank pors1968!

still looking at ;
- oil cooler hard line for a 74-89 911
- 16x7/8 or 16x8/9 wheel (no fuchs)
- pair of 3.5 bilstein or koni strut complete or just strut housing.

[tholyoak]

I have two sets of lines from the thermostat to the front cooler.
One set from a '74 and one from an '89. They have slightly different profiles where they enter the front wheel well.

One of the lines from the '89 has been repaired with a small section of copper piping near the connection for one of the front cooler hoses.

Todd

Originally Posted by Hugo 911

front valance found, thank pors1968!

still looking at ;
- oil cooler hard line for a 74-89 911
- 16x7/8 or 16x8/9 wheel (no fuchs)
- pair of 3.5 bilstein or koni strut complete or just strut housing.

[1990C4S]

Anyone in the GTA have an engine stand adapter for sale/rent/loan? My 'reseal' project has turned into a much bigger project.

[pors1968]

Originally Posted by 1990C4S

Anyone in the GTA have an engine stand adapter for sale/rent/loan? My 'reseal' project has turned into a much bigger project.

Ask bender706 he might have one use to fabricate them.

[Rich_911]

Originally Posted by 1990C4S

I have a BRAND NEW set of Rennline adjustable rear springplates with bushings. P/N SKU#:S-08001

List is $525US, they are about $800 CDN delivered.

These fit 911's up to 1987, they do NOT fit 88/89 with the longer torsion bars. (I bought the wrong model).

$400 CDN, I am in the GTA, I can ship or deliver locally.

Hi, do you still have springplates available?
I will take them.
Thanks.

[F&FFabrication]

J'ai les bisltein ou Koni strut si tu cherche toujours ..


Fred

Originally Posted by Hugo 911

front valance found, thank pors1968!

still looking at ;
- oil cooler hard line for a 74-89 911
- 16x7/8 or 16x8/9 wheel (no fuchs)
- pair of 3.5 bilstein or koni strut complete or just strut housing.

[1990C4S]

Originally Posted by Rich_911

Hi, do you still have springplates available?
I will take them.
Thanks.

Sorry, I thought I had marked these as 'sold', but it appears I forgot to do it.

I have updated my posting.

[1990C4S]

Anyone have a 3.2 cam tightening tool for sale or rent?

[tholyoak]

If you are referring to one of these, I have one I'm not going to be using anytime soon.

-Todd

Originally Posted by 1990C4S

Anyone have a 3.2 cam tightening tool for sale or rent?

[Charlie V]

Does anyone know a shop in Canada - prefer Vancouver area - that rebuilds 1982 911 power brake booster??

[1990C4S]

Originally Posted by tholyoak

If you are referring to one of these, I have one I'm not going to be using anytime soon.

-Todd

Thanks, but I think we are going to buy one.

[Uwon]

intensive windshield washer tank from a ‘86-89 911…looks like this….


PM me please
Johan