Parts Needed \ WTB

[1990C4S]

Anybody have a mechanical chain tensioner for setting cam timing?

Sell, rent, borrow....

I'm in the GTA.

[tholyoak]

I have a pair I'm not currently using.
-Todd

Originally Posted by 1990C4S

Anybody have a mechanical chain tensioner for setting cam timing?

Sell, rent, borrow....

I'm in the GTA.

[1990C4S]

Originally Posted by tholyoak

I have a pair I'm not currently using.
-Todd

Thank you, I'm going to try to get by without them tomorrow, if (when?) I fail I will PM you.

[1990C4S]

Originally Posted by tholyoak

I have a pair I'm not currently using.
-Todd

I was able to set the timing with a C-clamp, thank you for the offer though.

[jrbennett]

Does anyone have an old Sportomatic trans sitting around, or parts for the trans

I'm helping a friend out with his 911, first gear on the main shaft has a few broken teeth and there is heavy pitting on the pinion
thinking might be easiest to find a complete one

this is for a 1974, preferred unit is a 925/02 with mech speedo, currently has a 925/00 in it but will consider any type 925 sporto trans

[pors1968]

Contact AHB he is Ottawa region he have sporto

[1990C4S]

There's also a Sportmatic for sale on Facebook Marketplace. Peter Modrovic.

[Jp-oh]

Hi, looking for a rubber door sill cover, passenger side, and a working low tone horn. Located in Cowtown. Cheers.

[pors1968]

Originally Posted by Jp-oh

Hi, looking for a rubber door sill cover, passenger side, and a working low tone horn. Located in Cowtown. Cheers.

PM me horn for G model low tone is the short one and i might have rubber door if you have parts number

[pors1968]

Nice wheel flat 6 date 72 600.00 shipped

[elt0m]

Hi, I looking for a lock cylinder for a 911/964 with electric door lock system. I only need one asap. Located in quebec!

Picture for reference

[pors1968]

Looking for 2.7 heat exanger just to start engine cheap one

[Jim2]

Looking for used 930 Turbo Billy Boat/B&B headers - inside Canada

[Bergo]

Looking for a set of Weber 40 carbs, or possibly ITB's suitable for a 1968 2.0L T

[Bitb1]

Anybody have a mechanical chain tensioner for setting cam timing?

Sell, rent, borrow....

I'm in the GTA.

[brighton911]

For sale four 6J x15" cookie cutter wheels, 5 stud version. ET is 36 mm, date code is 73. Three are ATS and one is a Porsche original. All four are identical as far as appearance and dimensions. They have been refinished in what looks to be a quality urethane type paint. $350 I am located in Ottawa. If interested, please PM me. Thanks

[1990C4S]

Originally Posted by Bitb1

Anybody have a mechanical chain tensioner for setting cam timing?

Sell, rent, borrow....

I'm in the GTA.

I just did a 3.2 using a clamp....it wasn't too difficult.

Or look at Post #1022 up above...

[WeberM]

Great idea to keep parts in Canada.

I just joined this site, but it won't let me post anything that I might want to sell.

[1990C4S]

Originally Posted by WeberM

Great idea to keep parts in Canada.

I just joined this site, but it won't let me post anything that I might want to sell.

I think noobs can't post pics. You can post a description, then people can PM you.

[0piston]

looking for leather rear seat pads for a 964 model, also passenger side rear interior molding (above and to the right of the seat pad.please dm thanks