Parts Needed \ WTB

[Mark Henry]

WTB:
Straight Cohline hose end, off early 911 into tank.
Anyone got an old hose that they want to sell cheap?
The fitting and nut have to be good, but the hose can be junk.

Or does anyone have this hose in fairly good condition?
901-107-331-12-M20
http://www.pelicanparts.com/catalog/SuperC..._pg8.htm#item31

[haycait911]

Originally Posted by Mark Henry

WTB:
Straight Cohline hose end, off early 911 into tank.
Anyone got an old hose that they want to sell cheap?
The fitting and nut have to be good, but the hose can be junk.

Or does anyone have this hose in fairly good condition?
901-107-331-12-M20
http://www.pelicanparts.com/catalog/SuperC..._pg8.htm#item31

I'll take a look, I should have an end at least. I don't think I've ever thrown out an oil line.

[Mark Henry]

Originally Posted by haycait911

I'll take a look, I should have an end at least. I don't think I've ever thrown out an oil line.

Thanks Don

[Jim2]

Mark, I'll back up Don but cant get to my stash for a few days.

Jim

[Mark Henry]

Originally Posted by Jim2

Mark, I'll back up Don but cant get to my stash for a few days.

Jim

Thanks Jim

I'm not in a big rush as I have a lot other things to do.
But I'm getting real close and I want to have it on the road for April.

[haycait911]

here's some of my bits. can you circle what you're looking for? at least which type anyway, I can check that it's the right size for the tank.

[curtisr]

Originally Posted by billybek

Anyone have a drivers side seat slider (locking) for an SC? Don't need the non locking side.
Don't want to drill mine for a little project.
Thanks,
Bill K

Hi, do you have a part number? I may have such a beast. Please PM me.

[curtisr]

Originally Posted by curtisr

WTB: hen's teeth, Bigfoot photos or a chin spoiler to fit the early 928. Prefer the later. Will consider trade for a picture of me with Nessie.

I would settle for suggestions as to where I might find one. Thanks.

P.S.: I believe in miracles.

Got one. The chin spoiler, that is.

[Mark Henry]

Originally Posted by haycait911

here's some of my bits. can you circle what you're looking for? at least which type anyway, I can check that it's the right size for the tank.

Hi Don

Pretty sure you have at least a couple of the fitting I need.

The male hose fitting shown is what I need, but the one in the pic is a 30mm thread, I need the same fitting in 26mm.
Below on the calipers is the exact female tank fitting it's going onto, it has a 26mm thread size.

As long as the nut and fitting itself is in good usable shape it's cool, I don't need concours.
Thanks

[pors1968]

65-69 fitting

[Mark Henry]

F/S Three (3) oil filters, Mahle OC-54, NIB
fits 930 78-up and 911 and 964 '80-'94
$30 all 3, plus shipping or trade for 3 Mahle OC-61

WTB I still need the straight 26mm cohline fitting.

[Bergo]

WTB:

Rennline - floor boards, track mats, engine/transmission mounts, and strut brace
PMO fuel rails (prefer AN6 fittings)
WEVO - PSJ and short shift kit
Intercooler
Tial blow-off valve
Bosch 044 high-flow inline fuel pumps
Duck tail / deck lid
RSR / IROC 9" and 11" flair bumpers
Running/Rebuildable 3.2 long block for turbo project
RS style door cards (manual windows)
5-speed 915
LSD for 915
16"x11" Fuchs replicas

[haycait911]

Originally Posted by Mark Henry

F/S Three (3) oil filters, Mahle OC-54, NIB
fits 930 78-up and 911 and 964 '80-'94
$30 all 3, plus shipping or trade for 3 Mahle OC-61

WTB I still need the straight 26mm cohline fitting.

will this work?

[Mark Henry]

Originally Posted by haycait911

will this work?

PM sent

[strudelwagon]

looking for 2 - 16x9 Euromeister Fuchs replicas in good condition.
PM me...
tx Steve

[TargaT]

Hi, looking for any 914 performance/race oriented stuff such as FG bumpers, 2.0/4 engine parts such as crank heads etc. Anything else you have kicking around that I might be interested in.

Thanks, Joe

[Jim2]

Not sure if Strudel found some replicas but I'm also looking for a pair of 8x16 or 9x16 fuchs replicas.

[Tim K]

I have a nice set of 16x7 and 16x8 replicas. I think I need to sell them as a set unless someone buys the 16x7 separately. Let me know if there is interest.

Edit: **Sold**



Tim K

[Jp-oh]

Hello. I would like to buy a unicorn. Also a WEVO or Rennshift kit for a 915 (1986 3.2). I figured it wouldn't hurt to try here before I ante up full retail. Thanks, John.

[F&FFabrication]

Hi Im Fred from Montreal, I need part's for my 1970 911 italian
I Search a Left Oem turn signal lens. italian style . use in very good condition ..
I put the pictures for example