Pelican Parts Forums - 2020 New Random Pics

Pelican Parts Forums (http://forums.pelicanparts.com/index.php)

- Off Topic Discussions (http://forums.pelicanparts.com/forumdisplay.php?f=31)

- - 2020 New Random Pics (http://forums.pelicanparts.com/showthread.php?t=1065287)

Whose friggin thigh is that?

Quote:

Originally Posted by sammyg2 (Post 11166073)

1973, Most likely Spain during the filming of Papillon.

http://forums.pelicanparts.com/uploa...1609789949.gif

Thanks, Sammy

Fairly good sized wild pig...must have been eating well.

Quote:

Originally Posted by LJ851 (Post 11166054)

http://forums.pelicanparts.com/uploa...1609789270.jpg

My buddy sent me this McQueen photo, does anyone know when/where this was taken ?

I never cared that much for bikes. Have to admit, though, I'd look good on one, if Ali MacGraw was on the back.

^^^
maybe filming The Sand Pebbles

Sammy got it right - McQueen was still married in '66 during the filming of The Sand Pebbles. http://forums.pelicanparts.com/uploa...1609797751.jpg

Epic movie. I haven't seen that in forever. I refused to see the remake.

https://variety.com/wp-content/uploa...ake.jpg?w=1000

<iframe width="560" height="315" src="https://www.youtube.com/embed/lW_IWHw3z-U" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

I forget where, but I think that particular sub is on permanent display at a museum. The hull was modified with an entrance door for visitors.

Random pic:

http://forums.pelicanparts.com/uploa...1609823403.JPG

Le Redoutable.
<iframe width="560" height="315" src="https://www.youtube.com/embed/5npEtDjwmHI" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

Quote:

Originally Posted by URY914 (Post 11167991)

http://forums.pelicanparts.com/uploa...1609899710.jpg

That’s a hell of a chicken farm.

Also makes for lighter concrete.

https://www.buildyourownracecar.com/race-car-aerodynamics-basics-and-design/3/
http://forums.pelicanparts.com/uploa...1609943644.jpg

https://www.buildyourownracecar.com/race-car-aerodynamics-basics-and-design/4/
https://www.buildyourownracecar.com/...turiTunnel.png

https://www.buildyourownracecar.com/...s_Diffuser.png

Quote:

Originally Posted by A930Rocket (Post 11168086)

That’s a hell of a chicken farm.

Also makes for lighter concrete.

I have never seen this system before.

If that is a single layer for each floor, there must be steel reinforcement bar embedded into the lower prefabricated plane following the rule of; top is in compression, bottom is in tension. The rest of that wire may be for thermal expansion and contraction.

Waffle slab
https://en.wikipedia.org/wiki/Waffle_slab
http://forums.pelicanparts.com/uploa...1609944302.jpg

Quote:

Waffle slab is the most technical and economical type of roofs among conventional systems. The main element in the construction waffle slabs is waffle formwork[1]. A waffle slab or two-way joist slab is a concrete slab made of reinforced concrete with concrete ribs running in two directions on its underside.[2] The name waffle comes from the grid pattern created by the reinforcing ribs. Waffle slabs are preferred for spans greater than 40 feet (12 m), as they are much stronger than flat slabs, flat slabs with drop panels, two-way slabs, one-way slabs, and one-way joist slabs.[3]

Quote:

Originally Posted by kach22i (Post 11168428)

"Waffle slab is the most technical and economical type of roofs among conventional systems. The main element in the construction waffle slabs is waffle formwork. A waffle slab or two-way joist slab is a concrete slab made of reinforced concrete with concrete ribs running in two directions on its underside. The name waffle comes from the grid pattern created by the reinforcing ribs. Waffle slabs are preferred for spans greater than 40 feet (12 m), as they are much stronger than flat slabs, flat slabs with drop panels, two-way slabs, one-way slabs, and one-way joist slabs."

The ancient Romans had this technique figured out when they built the Pantheon over 2100 years ago.

http://forums.pelicanparts.com/uploa...1609965900.jpg

https://www.corbeau-seats.com/celebrating-the-launch-of-the-classic-sprint-x/
http://forums.pelicanparts.com/uploa...1609966181.jpg

Quote:

It is our great pleasure to introduce the Classic Sprint X Seat, Brand new for 2020! This seat has been designed to bridge the gap between a modern seat appearance in a classic car, with a gentle nod to our company heritage.

[QUOTE=masraum;11168972]I sometimes wish I was this creative!

https://www.familyhandyman.com/wp-co...to-furnace.jpg If they wanted more return air in the basement they could have just cut a hole in the main return. which they did and added a bunch of junk

[QUOTE=F150 FX4;11169696]

Quote:

Originally Posted by masraum (Post 11168972)

I sometimes wish I was this creative!

https://www.familyhandyman.com/wp-co...to-furnace.jpg If they wanted more return air in the basement they could have just cut a hole in the main return. which they did and added a bunch of junk

The link that I got the photo from had the same caption.

Quote:

Originally Posted by Racerbvd (Post 11169870)

http://forums.pelicanparts.com/uploa...1609988306.jpg

ROFLMAO

https://i.ytimg.com/vi/MBWnAxaUo-I/maxresdefault.jpg