Frunk upgrade

[nospiners]

Originally Posted by AG81

^
I also agree with your comments. My rework.

I love this look !!!!!! Simple yet beautiful ...

[pmax]

Originally Posted by AG81

^
I also agree with your comments. My rework.

Nice and clean lines.

Looks like you can even fit a folding sleeper or picnic table in that space for camping trips or something, customized of course with one end attached to the car or that strut brace.

[Uwon]

Originally Posted by AG81

^
I also agree with your comments. My rework.

Nicely done. What material did you use and how did you fasten?
TIA
Johan

[wazzz]

They are all pretty nice. This one is my favorite. Very slick design.
Wonder what the trap door is for and whether it is hinged or just removable.

[AG81]

Originally Posted by nospiners

I love this look !!!!!! Simple yet beautiful ...

^
Thank you

Originally Posted by pmax

Nice and clean lines.

^
Thank you.

Looks like you can even fit a folding sleeper or picnic table in that space for camping trips or something, customized of course with one end attached to the car or that strut brace.

^
LOL.... if you knew how particular I am you would be hysterically laughing.

Originally Posted by Uwon

Nicely done. What material did you use and how did you fasten?
TIA
Johan

^

The side material is Porsche frunk liner carpet. The floor and underside of the hood is patterned vinyl. The floor mat lays in place and had a backing material sewed onto in. The under hood was a challenge as I had to make a patterned mold and use a thin layer of foam sanded into shape. Lots of hours on that frunk.

[Josey Whales]

Originally Posted by AG81

^
Thank you



^
LOL.... if you knew how particular I am you would be hysterically laughing.



^

The side material is Porsche frunk liner carpet. The floor and underside of the hood is patterned vinyl. The floor mat lays in place and had a backing material sewed onto in. The under hood was a challenge as I had to make a patterned mold and use a thin layer of foam sanded into shape. Lots of hours on that frunk.

Would happen to have the dimensions/measurements for your setup. As in the L x W of each individual piece?

Great work btw, I'm working on something similar but your dimensions would help me immensely and reduce the amount of time and material used.