Pelican Parts
Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   Pelican Parts Forums > Porsche Forums > Porsche 911 Technical Forum


Reply
 
LinkBack Thread Tools
Author
Thread Post New Thread    Reply
Registered
 
Mark Salvetti's Avatar
 
Join Date: Sep 2007
Location: Boston, MA
Posts: 1,507
Quote:
Originally Posted by pmax View Post
The last 911 I saw "off road" was a late model water cooled variant next to one of those ramps, a couple years back.

Yeah, good tires but ...


Mark

__________________
1979 911SC Targa
Old 01-22-2025, 08:37 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #61 (permalink)
Still here
 
pmax's Avatar
 
Join Date: May 2014
Location: SF Bay Area
Posts: 18,226
Garage
Earlier, someone mentioned 0.8 and above.

CD tested the Carrera at 0.8g

Old 01-23-2025, 08:37 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #62 (permalink)
Get off my lawn!
 
GH85Carrera's Avatar
 
Join Date: Nov 2007
Location: Oklahoma
Posts: 85,884
Garage
Quote:
Originally Posted by pmax View Post
Earlier, someone mentioned 0.8 and above.

CD tested the Carrera at 0.8g

That .80g was with tires from the 1980s. The tires from this era are far superior in almost every respect. When using a track app like Track Addict, I see 1.0 on tight corners. Not real scientific, but I know my car on modern Summer tires handles way better than the old M/S tires of the 1980s or 90s.
__________________
Glen
49 Year member of the Porsche Club of America
1985 911 Carrera; 2017 Macan
1986 El Camino with Fuel Injected 350 Crate Engine
My Motto: I will never be too old to have a happy childhood!
Old 01-24-2025, 07:58 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #63 (permalink)
Registered
 
Bill Douglas's Avatar
 
Join Date: Jun 2000
Location: bottom left corner of the world
Posts: 22,880
A good book, no a great book, is the Vic Elford High Performance driving handbook. It's not all about racing, but rather about how cars handle and the physics of cornering. It all makes sense when Vic Elford tells it.

Old 01-24-2025, 10:44 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #64 (permalink)
Registered
 
Join Date: Dec 2024
Posts: 108
Quote:
Originally Posted by Bill Douglas View Post
A good book, no a great book, is the Vic Elford High Performance driving handbook. It's not all about racing, but rather about how cars handle and the physics of cornering. It all makes sense when Vic Elford tells it.

i just got it. I'm reading that when the car slides out to hit the brakes and clutch in???
or is that once the car is beyond correcting.
i need to re read
Old 01-24-2025, 12:29 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #65 (permalink)
Registered
 
A930Rocket's Avatar
 
Join Date: Oct 2003
Location: Mount Pleasant, South Carolina
Posts: 14,672
^^^ When you’ve lost it, it’s both feet in. The clutch in, to keep the engine running (and/or damage to the engine/trans ) and the brake pedal to slow down and stop.
Old 01-24-2025, 05:50 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #66 (permalink)
 
Grumpy old hasbeen
 
Join Date: Feb 2019
Location: Perth, Western Australia
Posts: 98
Garage
+1
at the advanced driving school the instructor said: once you have lost it, the steering wheel is only to hold your self braced and allow you to push the brake pedal even harder'

its important to recognize when to give up and commit to the spin, with brake and clut6ch in.
Leave it too late, doing your correction, you just hit harder/at higher speed.
Professionals are different, they can do things we normals wish we could. And even they loose it once in a while
__________________
Perth, Western Australia

'74 911 Targa
Old 01-24-2025, 06:30 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #67 (permalink)
Grumpy old hasbeen
 
Join Date: Feb 2019
Location: Perth, Western Australia
Posts: 98
Garage
double post
__________________
Perth, Western Australia

'74 911 Targa

Last edited by Hx911; 01-24-2025 at 06:31 PM.. Reason: duplication
Old 01-24-2025, 06:31 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #68 (permalink)
Registered
 
Join Date: Dec 2024
Posts: 108
Quote:
Originally Posted by A930Rocket View Post
^^^ When you’ve lost it, it’s both feet in. The clutch in, to keep the engine running (and/or damage to the engine/trans ) and the brake pedal to slow down and stop.
ok i wanted to make sure i read that right.
the book kind of meanders a bit. looking to see where he is talking about flowing the car through a corner.
seems that it's brake/ downshift, set the speed and neutral through the corner and then accelerate out.
Old 01-24-2025, 08:15 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #69 (permalink)
Registered
 
Alan L's Avatar
 
Join Date: Apr 2006
Location: New Zealand
Posts: 5,282
Garage
Slow in, fast out. Not sure about 'neutral' in the corner. Some context needed. Just 'drifting' thru the corner ain't the best option. Your traction comes from weighting the rear end - something the 911 does very well. There are many critical nuances to getting this right.
Don't overcook it going in to a corner. Thats what leads to trouble.
Slow in, fast out is also the quickest way around the track.
Of course the definition of 'slow in' may need some amplification - but you get the point?
I suspect most people panic as soon as the car gets a bit loose. That usually determines the end result. When it was at some point,still salvageable. Only a bit of seat time on a track can get beyond that point. Which is something that has been amplified in this thread multiple times. There is no substitute.
Alan
__________________
83 SC, 82 930 (track) - Stock except for RarlyL8 race headers, RarlyL8 Zork, K27-7006, 22/28 T bars, 007 Fuel head, short 3&4 gears, NGK AFR, Greddy EBC (on the slippery slope), Wevo engine mounts, ERP rear camber adjust and mono balls, Tarret front monoball camber adjust, Elgin cams, 38mm ported heads, 964 IC. 380rwhp @ 0.8bar Apart from above, bone stock:-)
Old 01-24-2025, 08:36 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #70 (permalink)
Racer
 
winders's Avatar
 
Join Date: Oct 2010
Location: Franklin, TN
Posts: 5,899
Quote:
Originally Posted by Alan L View Post
Slow in, fast out is also the quickest way around the track.
Of course the definition of 'slow in' may need some amplification - but you get the point?
Anything resembling "slow in" is NOT the quickest way around the track.
__________________
Scott Winders
PCA GT3 #3
2021 & 2022 PCA GT3 National Champion
2021 & 2022 PCA West Coast Series GT3 Champion
Old 01-24-2025, 10:11 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #71 (permalink)
Registered
 
917_Langheck's Avatar
 
Join Date: Dec 2020
Location: San Diego
Posts: 1,192
Garage
Kinda of going beyond the original scope of this topic - identifying the limit to set a not to exceed on normal road conditions. Racing techniques are a different ball of noodles.

(BTW neutral is application of ~10% throttle or just enough to keep the rear slightly loaded - and fronts not pushing - for throttle uptake and trackout past the apex.)
Old 01-24-2025, 11:48 PM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #72 (permalink)
Counterclockwise?
 
Join Date: Oct 2005
Location: Keswick, Ontario
Posts: 6,585
Garage
My 86 is a momentum car.
On many corners I will aim head on to the apex.
The car will understeer so by the time I'm at the apex I will clip it perfectly.
__________________
Rod
1986 Carrera
2001 996TT
A bunch of stuff with spark plugs
Old 01-27-2025, 06:32 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #73 (permalink)
Counterclockwise?
 
Join Date: Oct 2005
Location: Keswick, Ontario
Posts: 6,585
Garage
My 86 is a momentum car.
On many corners I will aim head on to the apex.
The car will understeer so by the time I'm at the apex I will clip it perfectly.
__________________
Rod
1986 Carrera
2001 996TT
A bunch of stuff with spark plugs
Old 01-27-2025, 06:45 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #74 (permalink)
Registered
 
Join Date: Mar 2014
Posts: 10,950
Garage
Quote:
Originally Posted by GH85Carrera View Post
That .80g was with tires from the 1980s. The tires from this era are far superior in almost every respect. When using a track app like Track Addict, I see 1.0 on tight corners. Not real scientific, but I know my car on modern Summer tires handles way better than the old M/S tires of the 1980s or 90s.
Yeah I don't think people realize just how much better modern tires are. Even tires from the modern era--I think someone recently took 15-20 seconds off the Carrera GT's 'Ring time just with 2024 tires vs. those available at the car's launch.

On Ventus RS4 even my little SC will bounce between 1 - 1.2g as it shimmies through a corner.

Quote:
Originally Posted by winders View Post
Anything resembling "slow in" is NOT the quickest way around the track.
Yeah fast in fast out is always better.

Slow in fast out is for learning and is good for intermediate drivers. Getting the "fast in" part right is what separates HPDE champs from paid racing drivers. Watching Leh Keen back a classic 911 in from start of braking through the apex is what that looks like. Something good to aspire to, but far from attainable unless you're really willing to risk a crash or two.

Pick the corners with good run-off and practice there, I say.

Edit: That reminds me... this was me practicing just that at CMP some years ago: https://youtu.be/uqVWQM6IOoM?si=w2uQzK5XKirbhU4i

Please ignore my adrenaline fueled laugh, it was a moment! Also I forgot how bad the camera angle was in this video.
__________________
1982 911SC

Last edited by David Inc.; 01-27-2025 at 07:26 AM..
Old 01-27-2025, 07:19 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #75 (permalink)
Registered
 
Join Date: Jun 2015
Location: Chicago, IL
Posts: 3,187
Quote:
Originally Posted by A930Rocket View Post
^^^ When you’ve lost it, it’s both feet in. The clutch in, to keep the engine running (and/or damage to the engine/trans ) and the brake pedal to slow down and stop.
My first HDPE was at age 18 in my dad's 320iS at Road Atlanta. On Saturday morning I learned "when you spin, both feet in." On Sunday morning I blew a rear tire in the esses and learned it directly. Useful knowledge!
__________________
'80 SC Targa
Avondale, Chicago, IL
Old 01-27-2025, 10:27 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #76 (permalink)
Registered
 
A930Rocket's Avatar
 
Join Date: Oct 2003
Location: Mount Pleasant, South Carolina
Posts: 14,672
Looks like a fun day at the track, David!
Old 01-27-2025, 10:32 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #77 (permalink)
Still here
 
pmax's Avatar
 
Join Date: May 2014
Location: SF Bay Area
Posts: 18,226
Garage
Interesting.

Were driving events ... for street cars ... really that tame back then due to the tires ?
Old 01-27-2025, 10:40 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #78 (permalink)
 
Registered
 
Bill Douglas's Avatar
 
Join Date: Jun 2000
Location: bottom left corner of the world
Posts: 22,880
Oh Jeezus David, I feel car sick driving with you LOL
Old 01-27-2025, 10:58 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #79 (permalink)
Still here
 
pmax's Avatar
 
Join Date: May 2014
Location: SF Bay Area
Posts: 18,226
Garage
That's a nice track, even better when it looks like he has it all to himself, no other cars !

Old 01-27-2025, 11:02 AM
  Pelican Parts Catalog | Tech Articles | Promos & Specials    Reply With Quote #80 (permalink)
Reply


 


All times are GMT -8. The time now is 06:25 PM.


 
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2026, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2025 Pelican Parts, LLC - Posts may be archived for display on the Pelican Parts Website -    DMCA Registered Agent Contact Page
 

DTO Garage Plus vBulletin Plugins by Drive Thru Online, Inc.