917 gear shift knobs?
 

a member here was making them recently. i found his posts but he does not reply to pm's thru this board. anyone have his contact info so we can buy some
Thanks!
dave

Did you try Email? Here's the contact info from a previous thread: http://forums.pelicanparts.com/showthread.php?s=&threadid=250277&perpage=20&highl ight=917%20and%20shift&pagenumber=1

"There has been a spark of new interest in my 917 replica shift knobs, so I thought it was time for an update. Yes I do still sell them, however they are now sold through my new company (WBS Fabrication and Machine) and because of demand and material price changes I have had to raise the price since last year. They are available in 901, 915 and G-50 shifter configurations and 1.5" or 1.75" diameter sizes. The smaller is the original 917 (38mm) size. The price is $50 + $4 shipping (USPS priority). Please e-mail me off forum if you are interested.

wbsfab@netzero.com

Mark.. "


Also, as suggested on that thread, here'a guy who makes and sells from 914club.com: http://www.914club.com/bbs2/index.php?act=ST&f=4&t=19486&

These are no longer available..

Thanks..
Mark..

Looks like the 914Club source may be the only one at this point....

http://www.914club.com/bbs2/uploads/...1098979941.jpg

thanks for the lead
Dave

well- that does not work out as mark was the lead on the 914 board too. any other suggestions?
thank you

My bad...the search continues...