|
|
|
|
|
|
Bland
|
Has anyone mounted a Carerra Cooler under the bumper?
I have a carerra cooler and a RUF front spoiler set up for a cooler. I am planning on mounting a carerra cooler under the front bumper but the lines come off of the end at a 45° angle and interphere with the bulkhead on the front of the car.
I would prefer not to cut into the bulkhead. Has anyone seen this done before? Are 45° fittings available to 'straighten' one of the oil lines back out so it will clear? Scott.
__________________
06 Cayenne Turbo S and 11 Cayenne S 77 911S Wide Body GT2 WCMA race car 86 930 Slantnose - featured in Mar-Apr 2016 Classic Porsche Sold: 76 930, 90 C4 Targa, 87 944, 06 Cayenne Turbo, 73 911 ChumpCar endurance racer - featured in May-June & July-Aug 2016 Classic Porsche |
||
|
|
|
|
porsher
|
You could thread an adaptor onto the cooler, like this
http://www.patrickmotorsports.com/part/560/ then use AN12 fittings of which there is a great selection, this would also lend itself to using braided hose and you can get rid of the rigid tubing. |
||
|
|
|