My dash is back and it looks great.

No pics?

Cost?

Sorry, here's the pics. The cost was about $695 plus shipping. I didn't need any new fasteners. Those were all in great shape. The base price is $595. I paid an extra $100 for blue vinyl.

Here's some pics of it laying a few inches short of where it belongs. It really looks great.

Dave

http://forums.pelicanparts.com/uploa...1443725017.jpg
http://forums.pelicanparts.com/uploa...1443725032.jpg

that looks great :D

Here's the dash bolted in. I finally had some time to work on it. I found that the dash wasn't as difficult to get in and out as I thought. All of the fasteners are easy to reach. I used a really long socket extension for four of the nuts that go through the face of the dash. The fifth nut that goes through the face of the dash I was able to get to through the clock opening. The other two bolts that drop down from the top of the dash are accessible through the speedo and tach holes. I hope to get the windshield in later this week and drive my car!!!



http://forums.pelicanparts.com/uploa...1446588266.jpg
http://forums.pelicanparts.com/uploa...1446588285.jpg

http://forums.pelicanparts.com/uploa...1446593565.jpg

Here are the pics I got today from the trimmers on mine. It started out as tan, and had a crack right across the top above the tach.


http://forums.pelicanparts.com/uploa...1446593682.jpg

http://forums.pelicanparts.com/uploa...1446593729.jpg