I have used a product called Plio Grip when securing repair panels above (Edit: over) rusted pickup wheel wells that I cut out.

It is vicious.

They make several types of adhesives. Expensive. $100 to get the kit in the picture.

http://forums.pelicanparts.com/uploa...1510858000.jpg

This may be a good choice. Just talking. Not advising.

man even the gun is totally cool !!!!

i'm still waiting for my marine sealant to harden up , I may have not given it enough time . I glued it 12 years ago.

I'm a Canadian so by default I am a peacekeeper.. well,,, sometimes..

This sets up a little quicker. Well under five years. :D

90 minutes working time for this stuff and then the 24 hour cure.

The cartridges are under $50. Once you use the mixing nozzle, it's done. Use it as a cap afterwards, blurp it out onto a piece of cardboard and mix by hand.

Anybody else use their products?

peace dude;-)iceman
https://img0.etsystatic.com/118/1/63...23074_rvz4.jpg

There is an theiceman on Rennlist.

He seem a choader. Not you right?

I have 13 posts with my 2001 start date. Grandfathered in with no participation fees.

You gonna let this guy steal your trademark? I would be furious.

Bob you are really funny;-) same Canadian boy as here....

Ivan

Thanks. theiceman has some work put into Rennlist.