SC parts - rear suspension, electrical, leather interior, etc

[78targa]

dvdman, how about $13 shipped for both items? The knob itself is in good condition although the numerals and dot are starting to fade. The plastic piece you need is in good condition.

Ok, off to a superbowl party. If I don't get back to you by tomorrow night and promised to do so, send me an email to remind me. I think I only owe shipping info to a couple of people.


So far the only thing gone is the cruise control stuff and the console. Other items are sold too, but I still have a second set for all of them!

[dvdman]

Originally posted by 78targa
dvdman, how about $13 shipped for both items? The knob itself is in good condition although the numerals and dot are starting to fade. The plastic piece you need is in good condition.

Sold! Just let me know where to send the money. I have a couple of other things I'm looking for, but I forgot to ask. I'm looking for a Seat Belt Bellows, Front Trunk Lamp Assembly and 2 Door Light Switch Washers (those big round ones). Thanks

[Al S]

78Targa,

Is the speedo an 85MPH? If so, I'll pass.

If not, how about $20.00 shipped, to Sumas WA, 98295?

Also, how do I pay you?

Thx

[73.5T]

Hi,
I'm interested in the shifter.

[78targa]

Al - yep, 85mph speedo. These are hard to find these days because everybody threw them out back in the day! Don't you want to peg the speedo???
Oh, alright I understand. I don't think I have a 150mph available right now. Sorry.

73.5T - Ok, I think I still have a complete shifter but will need to get it from a local shop where it is in a box. I have another one, but it is missing the knob...

[fast_e_man]

Casey,

Do you still have the oil level/fuel level gauge? I don't care if it works, just looking for good condition factory black gauge face set. I'm trying to replace the ugly red gauge faces put on my gauges by the PO. Would you take $10 + shipping?

thanks,

Ed

[78targa]

DVDman - I have the seatbelt bellows, Front trunk lamp assembly in really good condition complete with all wiring (very nice setup with super clear lens), hmm. I think I only have 1 door light switch washer, but let me check a couple of boxes.

Speedo is now sold

73.5T shifter complete with knob is available, I had 2. The shaft needs a repaint, but otherwise the assy is in good shape. I'll sell the shifter with knob and the shift assy for $75 plus shipping.

fast-e-man - I have a couple of these gauges, but $10 is a little low. I can sell one for $20. Face looks good, but the bezel should be sanded lightly and repainted. gauge gasket is in good condition.

[fast_e_man]

78targa,

I'm a go for $20 on the oil level / fuel level gauge. PM sent
thanks,

Ed

[75-911S]

Casey,
Could you send me a picture of the set of spring plates that Jim didn't buy?
Thanks.
Jack

jholgate@bellsouth.net

[78targa]

Jack,

The second set of spring plates are still on the car. Sorry for the dirty pictures, but they are straight and functional.

[luvndasun]

Hi Casey - Do you have the two prong male connector for the Reverse Light Switch? It is the two prong male connector that is part of the wiring harness and inserts into the female connection of the reverse light switch that is part of the transmission. Preferably I would like to have ample wire length on it so that I can splice it into my harness. If so, let me know how much to ship to 92121.
Thanks

[rpiper]

darn! I need a shift knob. Oh well. Hey do you have the windshield washer pump?

[78targa]

I do have the pump. I have tested it and it runs. How about $20 shipped? One person is still considering the whole assembly, but I haven't heard back yet. I would rather sellit as a unit as I am having difficulty in removing just the knob from the shifter. Assy is $75

luvndasun - PM sent. Unfortunately I don't think the one I have is very usable.

[fast_e_man]

Casey,

Payment sent, PM sent

thanks,

Ed

[thevojtiseks]

Hi, It's difficult to see in the pictures, but are the rear bananna arms Alu or metal ?? If alu what $$ would you be looking for ??

[78targa]

Well I can't get the shift knob off of either shifter assy so AFC AJAX was kind enough to give up his claim on the knob. One shifter is sold to Jim Hollinger the other is still available. I will only sell as a single unit. $75 obo

Ed - got it, thanks.

thevojtiseks - trailing arms are aluminum. You would be amazed at what a parts washer or bead blaster can do to these things. They very quickly look shiny and new. I am asking for $300 for the set. Comes with the stub axels and parking brake stuff around the hub (no rotors).

here is a shot of trailing arms before cleaning:



and here is a picture of the same set after:

[jim72911t]

Casey,
Sorry to hear you couldn't get the shift knob off. They are indeed a pain; I've used a padded open end wrench on the bottom of the knob and applied some light taps with a mallet.

Anyway, if the whole shifter assembly is boxed and shipped already, I'll make you and whoever wanted the shift knob a deal. The shift knob is coming off when I get the shifter, since a) I have a four speed, and b) I have an unused Momo I got as a gift a while ago, so the shift knob is of no use to me. If whoever was promised the knob pays you, I'll take it off and ship it to them, no charge.

You've been more than fair to me in our dealings, and I see no reason why I shouldn't "pay it forward."

Let me know if this will work,
Jim

[911SCfanatic]

availability and price of engine wiring harness? in particular, wiring from 6-pin box to distrutor hall effect sensor. thanks.

[78targa]

Jim - my plan was to send you the complete assembly with the knob that is on it because promised the assy and can't bring myself to destroy the knob. If a deal can be reached that would help me out, I would appreciate it, but its not expected. Thanks.

Bill - I must be a dummy on some stuff, but what is the "hall effect sensor"? I am not the best in my wiring knowledge of 911's. I am missing most of the engine harnesses out of both of these cars thogh so odds are I don't have what you are looking for. Still, I don't mind checking.

[911SCfanatic]

It's inside the SC dizzy. There's a small wire connector that goes into the side of the distributor housing that plugs into this sensor.