1980 SC - CIS, AC, and other parts

[K Sykes]

All parts from a 1980 SC USA model. All removed as a result of backdating heat, switching to EFI and taking out AC. All prices exclude shipping. Can take pics of all, describe in more detail and willing to test mechanical or electrical parts if there is a way to do that.

- CIS “brain” - $100
- CIS Harness - $50 (oxy sensor plug is cracked and power wires are cut with about 6” out of the plug to the brain)
- AAR $100 – works well
- Behru spark plug wires $50 – the ones with the braided steel sleeves – put on when the engine was rebuilt – have about 10k miles on them SOLD
- Cruise control brain - $75
- Cruise control vacuum cylinder $25 – up near the hot air blower drivers side
- Fuel Distributor - $175
- Metering plate and assembly $50
- CIS “snorkel” $25 (the rubber thing that connects to the throttle body and the metering plate)
- Front “tow hooks” 25$– Clean and painted with POR 15 – didn’t fit after my ER suspension updateSOLD
- Air conditioning stuff:
- Receiver/dryer $30 -
- Front condenser $20
- Engine lid condenser $20
- Heat exchanger (smugglers box) $20 – needs the icing tube and perhaps some soldering – also have the fan and top and bottom enclosure that it goes in $35. Fan runs well.
- Plastic heater blower tube – this is the corrugated plastic airway that attaches to the left side of the heater blower and runs back to the heat exchanger.
- 14 pin connector have both sides – car side has about 2” of wire attached, Car side is open and I have all the wires that go to the engine, but it’s a “bag of wire” at the moment

[oistein]

Hello !
Can you send pictures of the wires ?

- Behru spark plug wires $50 – the ones with the braided steel sleeves – put on when the engine was rebuilt – have about 10k miles on them

isteindsn1@gmail.com

Regards Řistein

[NoYouRelax]

I'll take the wires....send payment info

[andoni510]

Front condenser $20
also have the fan and top and bottom enclosure that it goes in $35. Fan runs well.

Interested on these. PM sent.

[willyraz]

Do you have the fuel line from the center of the fuel dist. To the warm up reg.? It is half metal half plastic.

[NoYouRelax]

I meant spark plug wires. I'll take them

[K Sykes]

Watched the Superbowl last night - will catch up on picture requests this AM.

[K Sykes]

[QUOTE]willyraz
Fuel line
Do you have the fuel line from the center of the fuel dist. To the warm up reg.? It is half metal half plastic.
/QUOTE]

I don't think so, but I'll look through my box of random stuff..

[jpkelly3]

Are the fuel lines to injectors metal?

Thanks

[K Sykes]

jpkelly - all I have is the fuel distributor itself. The lines to the injectors were plastic and weren't useable again

[oistein]

Hello !

Sent you an email.

Regards Řistein

[K Sykes]

Weekend bump

[TibetanT]

I would like this item you have available:

Front “tow hooks” 25$– Clean and painted with POR 15 – didn’t fit after my ER suspension update


Do you have pictures of the this? I would like to ensure they are what I am thinking about. Thank you!

PM on the way to you.

[K Sykes]

Sent you pics

[TibetanT]

I got the pictures!

I will take them, and PM on the way with my contact information.

Also replied to the Email.

thank you

[K Sykes]

Bump for humpday.

[inaminit]

Would like the 14 pin plugs and the bag of wire if these have the pin ends-pending a price. Thanks

[sc]

pm sent!

[K Sykes]

All PM's replied to..

[lsf911]

Kinsley,

I sent you a PM about the AAR.