|
|
|
|
| Author |
|
|
Registered
Join Date: Nov 2000
Location: Longmont, Colorado
Posts: 1,859
|
correct front suspension oring size
Does anyone remember the conversion sizes in SAE for the metric o'rings on the front roller bearings?
it was a thread running a day or two ago on world. I remember it was 55mm, but the conversion was something like: 2 1/8th or ? tia brant
__________________
914/6 2.0S with twin plug all metal body panels 19quarts of oil 4 gallons of gas and 1826 lbs (wet) |
||
04-27-2012, 08:29 AM
|
|
|
Registered
Join Date: Dec 2003
Location: Milky Way Galaxy - 3rd Stone
Posts: 871
|
Well Brant .... 1"= 25.4 mm so .... 55/25.4=2.165"
1/8" = 0.125" and further 2 1/8"= 53.975 mm 5/32"=0.15625 and further 2 5/32"= 54.76875 mm 11/64"=0.171875" and again 2 11/64= 55.165625 mm Rock & roll Ron
__________________
Ron Meier Backyard Shadetree Mechanic 1974 914/6 conversion with 2.7L (The Grey Ghost) 1973 Chalon with 2.4T MFI (Schlitzalom) All my 4 cylinders are gone 
|
||
|
04-27-2012, 09:05 AM
|
|
|
Registered
Join Date: Nov 2000
Location: Longmont, Colorado
Posts: 1,859
|
Nice...
thanks Ron I was going to say something funny about the math lesson then I realized... duh he is right and I am being stupid. thanks brant
__________________
914/6 2.0S with twin plug all metal body panels 19quarts of oil 4 gallons of gas and 1826 lbs (wet) |
||
|
04-27-2012, 09:45 AM
|
|
