3.4 liter Dawe's built race engine

[naro914]

I'm going to post this here and in the 911 parts for sale forum because the engine can be used in either. The transmission is 914 specific obviously and on another listing.

Since my unfortunate incident at Summit Point in September, we've decided to go in a different direction for our PCA racing. The chassis seems just a bit too damaged for us to want to rebuild it - time, money, effort, etc.... Therefore, most of what made our 914 race car Papa Smurf so wonderful is now for sale. This is the listing for the engine. Built and maintained by Dawe’s Motorsport Development, this has been the most reliable, most powerful and overall most fun engine we've ever had in this car since we started going on track in 1993. VERY strong, always starts right up. Fuel injected, twin plug (coil on plug), and all the little goodies and Dawe's pixie dust that make their engines some of the best out there.

My list here is just what I can glean out of all the stack of receipts to build and refresh the engine. If you have specific questions I will try to get answers.

3.4 liter twin plug
930 Turbo engine case – line bored
996 cup main bearings
Clevite rod bearings
upgraded timing chain
Pauter Rods
996 GT3 oil pump
935 Rocker Shaft seals
Mahle Pistons and Cylinders
3.2l heads ported/polished
titanium retainers
Bosch injectors
coil on plug ignition
DTA ECU
Individual throttle bodies

Uses 110 octane leaded fuel

2019 refresh with new bearings. Only about 15 hours of use since the refresh.

325 RWHP @7000 rpm
279 ft-lbs torque @4700 rpm flat through 5800

Engine is currently still in the car but not able to run since the fuel cell and oil system has been removed. It ran fine after the accident, but we took everything out of the front with the thought of pulling the chassis...

PRICE: $35,000
Located in Denver, NC (outside of Charlotte)


Pictures on our website.

https://naroescapemotorsports.com/product/3-4-liter-air-cooled-race-engine/