High performance and stock T4 engine parts

[73notch]

:-( my entire t4 engine lot is up for sale. hopefully ill be able to do it later on.
help me out.
heres what i have
-new 78.4mm DPR stroker crank with type 1 journals(stock rod journals, 10 on mains)-400
-new 96mm piston and cylinders(already machined by rimco to proper specs) and hasting rings-350
-H-Beam Rods, type 1 5.395"-300
-Webcam 163/86b broke in on dyno only.-75
-HEADS
-1.7l heads, recently rebuilt-100
-1.8 heads-75
-2.0 heads oval ports, non porsche-75
new Johnson lifters-offers
-2L crank and rods-100
-1.8L crank and rodsx2-50 each
-2 cases in good condition, 1 is polished on top, the other isnt. ?
- 1.7 p+c set, barely used, couple broken fins-40
-new 210mm clutch-10
-bus 210mm flywheel-40
-210mm new pressure plate-30
-porsche 914 flywheel-50
-215mm used pressure plate/clutch-20
-fuel injection system off of 1.8l engine-100
-used 1.8l p+c set-30
-3 94mm cylinders-30
-stock aluminum pushrods-15
-valve covers-10
-windage tray-10
-2 fan shrouds w/ alternators-40 each
-CB carb manifolds-35
-rebuilt 42 DCNF carbs-250
-DCNF t1 manifolds-30
-DCNF t4 Shortie manifolds(very short, good if you are putting in a type 3)-50
-Both of Jakes Bug Me videos, How to rebuild your T4(VHS)-20, and DTM install.(DVD)-20
-VDO 2.5” tach-25
-engine tins

Email me with offers.
Shipping not included in price
After a week, they are going on ebay
If you need something not on the list, ask me, I might have it.

Pictures of almost anything HERE>>> http://www.cardomain.com/memberpage/426700/2

rcryan85@yahoo.com

[Type 4 Unleashed]

The stroker crank, is it type four, and what are the rod and main dia. Thanks

[tmh75]

Tell me about those 1.7 heads, who did the rebuild? How long ago? and what was done? (3 angle cut, new springs, valve guides, any of those goodies?)

Todd

[david c.]

any Webers or air cleaner assemblies to fit Weber IDF carbs?

[SGB]

Dave-
Aircooled.net has Weber air cleaner assemblies.
Notch-
got a tuna can for a 2.0

[Project66]

I am interested in the 1.8L heads. If it doesn't have cracks, or other problems, I'd like them. What's their story?

Victor Wallace
skiwallace@mac.com

[privera911]

Originally posted by 73notch
:-( my entire t4 engine lot is up for sale. hopefully ill be able to do it later on.
help me out.
heres what i have
-new 78.4mm DPR stroker crank with type 1 journals(stock rod journals, 10 on mains)-400
-new 96mm piston and cylinders(already machined by rimco to proper specs) and hasting rings-350
-H-Beam Rods, type 1 5.395"-300
-Webcam 163/86b broke in on dyno only.-75
-HEADS
-1.7l heads, recently rebuilt-100
-1.8 heads-75
-2.0 heads oval ports, non porsche-75
new Johnson lifters-offers
-2L crank and rods-100
-1.8L crank and rodsx2-50 each
-2 cases in good condition, 1 is polished on top, the other isnt. ?
- 1.7 p+c set, barely used, couple broken fins-40
-new 210mm clutch-10
-bus 210mm flywheel-40
-210mm new pressure plate-30
-porsche 914 flywheel-50
-215mm used pressure plate/clutch-20
-fuel injection system off of 1.8l engine-100
-used 1.8l p+c set-30
-3 94mm cylinders-30
-stock aluminum pushrods-15
-valve covers-10
-windage tray-10
-2 fan shrouds w/ alternators-40 each
-CB carb manifolds-35
-rebuilt 42 DCNF carbs-250
-DCNF t1 manifolds-30
-DCNF t4 Shortie manifolds(very short, good if you are putting in a type 3)-50
-Both of Jakes Bug Me videos, How to rebuild your T4(VHS)-20, and DTM install.(DVD)-20
-VDO 2.5” tach-25
-engine tins

Email me with offers.
Shipping not included in price
After a week, they are going on ebay
If you need something not on the list, ask me, I might have it.

Pictures of almost anything HERE>>> http://www.cardomain.com/memberpage/426700/2

rcryan85@yahoo.com