|
|
|
|
| Author |
|
|
Registered
Join Date: Aug 2002
Location: San Jose
Posts: 105
|
914 Carbon Fiber lids by "GT racing"
These are barely used. The front lid has four 1/2" holes drilled where GT type pin latches would fit. One hole has some smaller holes drilled where a plate would mount. Underneath the two front corners, the structure was cut where the pins attach. The rear has some scuff marks that may need sanding and clear sprayed. These are made with fiberglass frame and layer plus a top layer of CF. From the top they look nice. The sides are not finished and where the holes were drilled have separated from the FG layer. They just need epoxy glue and black filler if you want them better finished. They have the threaded inserts so they are bolted on the hinges like the stock lids. There are also inserts for the stock latches. You will need prop rods since the stock springs are too strong for FG or CF. email me for more pics. $800 for the pair...
Must pick up in San Jose, CA. Sorry no shipping.
__________________
Felix 1974 914 250hp 2.7tt Audi conversion, neo914-6 concept 1990 300CE, 217hp AMG 3 piece wheels 1988 300TE, 260hp RENNTech 3.6L 1990 300E, 185hp stock Last edited by Felix; 11-26-2005 at 01:50 PM.. |
||
11-17-2005, 10:01 PM
|
|
