|
|
|
|
|
|
Registered
Join Date: Mar 2005
Posts: 96
|
This is a New custom made gearbox oil cooling system. Made using the original factory internal spray bar. Will lubricate the ring and pinion and all internal gears both upper and lower rows with pressure relief valve. Comes complete with 915 tail cover that is already machined for the oil manifold and spray bar assembly. Also includes a cover plate incase of an emergency you can remove and cover tail cover. Includes two spray bars one with a longer tip and one with a shorter tip incase you have a reverse differential assembly or as a second spare. No extra work needed just install spray bar in the factory hole that all 915 gearboxes come equip with. All you need is a Tilton or other type of lubrication pump to circulate gear oil and add a fitting on drain hole to supply pump inlet. That's it your done and your gearbox temperatures will drop big time. Any questions My direct e-mail is: RSanchez17@aol.com Below is link to e-bay for item photos.
Thanks for Looking ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
||
|
|
|
|
Registered
Join Date: Mar 2005
Posts: 96
|
Sold
|
||
|
|
|