FS: front & rear suspension, glass, engine lid, targa top, wheel, & engine crossbar

[Drew_Dye]

I have a front suspension unit and a pair of rear arms. Both rear arms have CV axles, shocks (including springs) and the hubs and the passenger-side arm includes the caliper. The front suspension unit has both struts (including top mounts), rack and pinion (one of the boots needs to be replaced), both arms, and torsion bars.
I have a rear window, a '70-'72 door window (I think it's the driver's side one, but I'll have to dig it out to verify) one driver's side window glass guide channel ('70-'72), a pair of '73-'76 window glass guide channels, a pair of door windows ('73-76), and two door quarter-glasses (the small triangular windows).
I have an engine lid with the rain tray, grill, hinges, and spring rods. The rain tray has a crack on the driver's side, but no chunks missing and can be repaired with JB Weld. There's no rust, but it needs a repaint.
I have a targa top that I believe came from a '73.
I have a slotted 5.5 X 15" steel wheel. There's some light-to-medium rust. It would do just fine with a bit of cleanup and a fresh coat of paint. There's no tire on the wheel.
Finally, I have an early engine crossbar (the straight one that has a rectangular cross-section and no opening for the shift rod to pass through). I don't have the rubber mounts that attach the engine to the crossbar, but I do have the hardware that joins the crossbar to the chassis.
Post a reply and/or send e-mail (drew_dye@yahoo.com) if you're interested or have any questions. If you're interested in buying a particular part, just make an offer. I am willing to send pictures (especially in the case of the targa top and the engine lid). Thank you.
-Drew