|
|
|
|
|
|
Registered
Join Date: Apr 2001
Posts: 2
|
Hi,
I´ve got a problem with a 88 928S4: after changing the timing belt, both fans run countinously. I can only stop them by removing the fuses. Is it possible that only of the temp. sensor is broken? I can only find 2 sensors on the top of the engine and the sensor of the freon. Whats about the electronic control unit? Does anybody has a wiring diagram for a 88 928S4? I need the circuits for the fan control and the wiring of the temp. sensors. Bye, bye Marco [This message has been edited by Marco@928S4 (edited 04-19-2001).] |
||
|
|
|
|
Registered
|
Try the 928 forum, not too many here own 928s.
http://www.pelicanparts.com/cgi-bin/ultimate/forumdisplay.cgi?action=topics&forum=Porsche+928+Technical+Forum&number=10&DaysPrune=45&LastLogin= |
||
|
|
|
|
Registered
Join Date: Apr 2001
Location: NC
Posts: 411
|
Try the 928 board at Phil Tong's site--
928s4vr.com Or try the Rennlist board at rennlist.com. Both are very active and full of information, my first shot would be Phil's. Dave951M |
||
|
|
|