|
|
|
|
| Author |
|
|
Registered
Join Date: Mar 2008
Location: Chatsworth, Ontario, Canada
Posts: 561
|
Help-need late model owners help!!!
The PO cut off the plug end for the thermofan switch, and hard wired the three wires to the switch with female connectors. He screwed up.
I'm replacing the old switch with a new one. Can someone with a 3 wired (late) switch tell me what order the wires are in ? As in...outside, middle, outside...whatever. The wires are brown, brown/yellow and red/white. I've got the wiring diagram...of course it has numbered the terminals 1, 2,3...the switch (OEM) has a "+", 1, 2 in that order from left to right under each prong on the switch. ARRGH!
__________________
Rick Harrison 1988 944S 17 inch Cup 2's, euro bumper conversion Magnaflow 2 1/2" exhaust with K & N 4 inch custom intake MaxHP chipped |
||
03-24-2010, 01:00 PM
|
|
|
Registered
Join Date: Jul 2004
Location: Upstate New York
Posts: 3,274
|
The middle one is brown.
__________________
Good luck, George Beuselinck |
||
|
03-24-2010, 04:08 PM
|
|
|
All Spooled Up
Join Date: May 2009
Location: Between NE and Central PA
Posts: 2,516
|
This is just a guess, but I'd say that red/white goes to the + terminal.
__________________
>gray 89 951S - K27/8, MAF, 3" intake, 3" exhaust w/separate waste pipe, 55# inj, late cam; >red 87 924S - chip, K&N, punched-out cat&muffler >black 80 924 - (sold) >maroon 77 924 - auto (sold) |
||
|
03-25-2010, 03:28 AM
|
|
