Tool box stickers?

[Stephen03]

free picture hosting

One down side to a new tool box is the loss of my beloved stickers but on the other hand it is a new canvas.... a much bigger canvas.

I got the solo rennbay decal on the back but I am looking for something large. Anyone know of a good source for 944 or custom sticker/decals? I miss my big Jagermeister sticker most of all though.

Tired of the old aircraft stickers... working on them is bad enough let alone staring at the name of your most hated aircraft manufacturer.

[rsoles27]

i have a pelican parts sticker or 2.

[curtisr]

For something a bit different you could always make your own stickers. I've noticed that a number of Porsche owners have simply submitted a picture (or two) to sites such as Zazzle | Custom T-Shirts, Personalized Gifts, Posters, Art, and more and then ordered stickers featuring said pic.

Zazzle's fine print:
Square Sticker

Create custom stickers for any occasion! Customize a variety of existing designs or add your own photo, logo or text. The perfect choice for any message or design, square stickers are great for brand promotion, special mailings, and scrapbooking.

Available in 2 sizes
Large: 3" x 3" (6 per sheet)
Small: 1.5" x 1.5" (20 per sheet)
High quality, full-color, full-bleed printing
Scratch-resistant front, easy peel-and-stick back
No minimum order


Other sites such as SublimeStickers.com - stickers, custom stickers, vinyl stickers, free stickers, wall graphics, bumper stickers offer other sizes.

Hope this helps. The 'sticker' below is from zazzle.

[9FF]

Snap-on has some cool decals, the middle one is a Sunset magnet...mine:

[Cocacolakidd]

The engine in picture one - What do you want for it - I want to drop it into my 85.5

Go fast goodies - Pelican parts stickers, Koni Stickers, Stage 8 fasteners, nitrous oxide - PM for shipping

[Stephen03]

$600 000.00 would take it, but 1200hp and 3400 ft-lbs torque at an output of 1700 rpm would get you down the track fast enough. Limited to 3400 ft-lbs by aircraft, Reserve take off power up to 5000 ft-lbs is allowed on our sd-360 aircraft. So who knows how high it can go.

[Stephen03]

free picture hosting

Going to a print shop to see if they can get a white outline of this goose, maybe 4' wide. Either this or the roof line of a 944. I've seen a similar decal I believe it was big foot 944 or something.

[old 924]

there was a guy on here makeing custom decals he had a 3 36in. porsche chrest and was asking ppl. if they wanted custom stuff..i think it was like 3 or 4 weeks ago i seen it..look back at the older post's..i was thinking about one for my toolbox..took off all the bmw stuff and repainted it..i'll see if i cant find it..

[Fara]

Not sure if it's a faux pas, but Van over on rennlist's 944 forums does custom vynal printing. good quality stuff too. He did my rear hatch banner.

[old 924]

that might be him..for the life of me i cant remmber where i seen it..i swear it was here..??i either seen it here or 924board..not sure now and i looked and cant find it..dame i knew i should have got one when i seen it..

[Volhv]

A good way to keep stickers, and transfer them between toolboxes, is to stick them to magnetic paper. I'm not sure what the proper name for it is, but you can get it at Michaels.

By the way I work at YXX.... we're practically neighbors.

[_ERIC]

I just have a pelican sticker on mine, nothing too crazy

[F1Rocks]

I have a vinyl cutter and can cut most anything you want. I haven't mastered multi layer stuff yet but if you want some of the good Porsche vendor type stuff, I have most

Don't do this for a living so I just would want vinyl cost and postage covered.

Motul
Mahle
Shell
Bosch
Porsche Crest
F1 stuff
Most of the major car marque's.

shoot me an email and we can work out something

brent dot knoll at gmail dot com

[Stephen03]

image host

would you be able to do one like this?

[F1Rocks]

Unfortunately I don't have a vinyl printer. I can cut an outline but it wouldn't have the detail you'd like.