WTB: '85 944 N/A oil hose assembly
 

My 944 race car has an oil breather valve (blue cap in the attached photo). For some unknown reason last track day it started spewing oil out of it like crazy. My mechanic recommended that I go back to the stock oil hose assembly which runs under the intake manifold. I have looked thru the 944 engine diagram (see link below) but can't figure what part #s I need.

http://www.porsche.com/all/media/pdf/originalparts/en/E_944_85_KATALOG.pdf

Do any of you guys happen to know where to find these parts locally? I want the car to be ready by June 8th. I am located near Provo Utah.

Thanks in advance.


http://forums.pelicanparts.com/uploa...1243533136.jpg

That would be the "low pressure" port on the Air / oil separator. There is usually a hose that goes from the top of there to the j-boot.

If you are getting oil out of there, there is probably too much oil in the crankcase!

On a couple of occasions at the track, we have had cars vomit oil up through there into the j-boot... Everytime, they have been over-filled with oil. Removing enough oil to bring the level to "full" resolves the problem.

If that doesn't resolve your issue, drop me a PM, I probably have a couple spares lying around the race trailer.

-Nick