|
|
|
|
|
|
Registered
Join Date: Mar 2010
Posts: 2
|
Fire damaged late model Porsche 944 race car for parts
For sale is a fire damaged late model Porsche 944 race car for parts. It has MDS electronics, burned late model rear coil overs and fuel cell. Asking $3000.
We are helping to sell the cars and parts of fallen SCCA 944 racer Alan Burgess. Please call Gary Merideth at 407-748-1488 if you have questions. Larger pictures can be seen at http://soundorama.com/car_parts ![]() ![]() ![]()
|
||
|
|
|
|
Registered
Join Date: Nov 2009
Posts: 43
|
strut brace any good . i have a s2 will it fit , what size is the wheels looking for 16
|
||
|
|
|
|
Porsche Enthusiast
|
Location?
__________________
1987 Porsche 944 Turbo 2005 Subaru Outback 2005 Volvo S60 Turbo AWD |
||
|
|
|
|
Registered
|
Is the header panel fiberglass?
__________________
1988 944 Turbo: Modified Corvette Killer |
||
|
|
|
|
Registered
|
What about the roll cage? Please let me know if it is available.
|
||
|
|
|
|
In the Fires of Hell.....
|
Man, it's hard to believe that the driver was burned so badly, based on the car's condition.
My thoughts go out to Alan's family and friends... Looks like the car is in FL.
__________________
PCA Instructor: '88 951S - with LBE, Guru chips, 3Bar FPR, 1.3mm shimmed WG, 3120 lbs, 256 RWHP, 15 psig boost |
||
|
|
|
|
|
Registered
Join Date: Aug 2004
Location: The Brink
Posts: 2,838
|
I do not want to ask if it is unappropriate, but there is no comment on what happenned to the driver?
|
||
|
|
|
|
winter-hater club member
Join Date: Oct 2003
Location: salt lake city, utah
Posts: 24,705
|
per search on google, he died. very very unfortunate. from the looks of the car, and i am no expert, the fuel line caught fire. i am going on the fact that the fire was on the right side of the car and pretty much involved only that part of the vehicle.
__________________
2000 Corvette - ????, 2007 Buell XB9R - Astrid, 1996 Discovery - Piglet, 2000 Forester "COOL PRIUS!" - Nobody Ever |
||
|
|
|
|
Registered
Join Date: Mar 2009
Posts: 483
|
anyone heard a response to inquiries? I've emailed the seller and heard nothing. Just curious.
|
||
|
|
|
|
Garage Helper
|
Via Con Dios Mi Amigo
|
||
|
|
|
|
winter-hater club member
Join Date: Oct 2003
Location: salt lake city, utah
Posts: 24,705
|
did you see the pictures of the interior? what a hellish nightmare.
__________________
2000 Corvette - ????, 2007 Buell XB9R - Astrid, 1996 Discovery - Piglet, 2000 Forester "COOL PRIUS!" - Nobody Ever |
||
|
|
|
|
Registered
|
After leaving a message I haven't received a call back. Id like to buy the fiberglass header panel, fiberglass fenders, rim center pieces, windshield (if it has the antenna within the glass), engine stand and the new rotors if he gets back with me.
__________________
1988 944 Turbo: Modified Corvette Killer |
||
|
|
|
|
|
In the Fires of Hell.....
|
Looking at the larger pictures it seems that the rearmost fuel line failed where it mounts to the fuel rail (looks like an AN fitting), closest to the firewall. It must have been spewing fuel onto the passenger side area, possibly getting into the passenger compartment (The firewall has been modified to tie the roll cage into the front strut towers).
http://www.soundorama.com/car_parts/CarPartPhotos/100_2644.JPG The interior of the car actually doesn't look too bad to me; the shift handle is still mostly intact, the gauges are not melted, most of the foam on the seat is intact. Keep in mind that (Hopefully) the racer got out of the car before most of the flames would be burning, especially in the interior. http://www.soundorama.com/car_parts/CarPartPhotos/100_2636.JPG Sad to see, and one more reason to take real good care of your fuel lines and fittings...
__________________
PCA Instructor: '88 951S - with LBE, Guru chips, 3Bar FPR, 1.3mm shimmed WG, 3120 lbs, 256 RWHP, 15 psig boost Last edited by kdjones2000; 04-05-2010 at 03:02 PM.. |
||
|
|
|
|
Registered
|
It is a good incentive to maintain the fuel lines.
__________________
1988 944 Turbo: Modified Corvette Killer |
||
|
|
|
|
Registered
Join Date: Sep 2006
Location: Blairsville GA
Posts: 1,020
|
Guys, the seller of these parts is very busy during the week. He is not looking to make much money off these parts, but rather help liquidate the parts for Allan Burgess family. I spoke to him about the racecar earlier today. He is new to Pelican Parts, and has recieved your emails and PM's but needs to organize who has first come on which parts. Please give him some time to return your emails and PM's.
__________________
- Elliott Grafton - 944Barn |
||
|
|
|
|
Registered
Join Date: Jan 2008
Location: Central California
Posts: 462
|
Yes, and seal up your firewalls. And if your car is on fire....stop NOW and GTFO!
Adding to the heartbreak is the fact that he had a fire suppression system, but the safety pin was still in. This story actually gave me nightmares. I hope this stuff sells fast so the family can start to move on. Tragic.
__________________
84 Red 944 NA - Das Swurvenwagen - still street legal but it's just a track toy My Website: http://www.TrackPics4Less.com |
||
|
|
|
|
Registered
Join Date: Sep 2009
Location: Georgia
Posts: 35
|
would like the wheels if the fit my early offset. plz give me a price and what year the car is they came off of.
sorry for the loss...RIP if u can during your free time send me a PM plz. |
||
|
|
|
|
your average wrencher...
|
its on ebay now.......Item number: 160421250522
__________________
1982 931 *project* 1986 951 Garrett turbo, Rogue Tuned (sold )1987 944S chipped, konis, rollbar (traded) 1979 924 total rebuild and blueprinted (sold) |
||
|
|
|
|
Registered
Join Date: Jun 2004
Posts: 48
|
look closely, no one commented that the motor has been moved back 6+ inches, and firewall modified, lots of custom work on this car!
__________________
had a bunch of 44's, tryin rotary for a bit.... |
||
|
|
|
|
SLED GUITARIST
|
Struts
2 - Strutts MO30? #944 343 031 03211
$50 And 4 - Spacers - 1.55 inches Are they available? |
||
|
|
|