|
|
|
|
| Author |
|
|
Registered
Join Date: May 2009
Location: Sunny SW Florida
Posts: 266
|
944na & 944S Parts
I have accumulated a bunch of extra parts over the course of my current engine rebuild project. Now I need to sell some to help fund the remainder of the project. PICTURES OF ALL ITEMS ARE INCLUDED BELOW
Oil panwith baffle 944.101.201.11. Not much I can say about it. Pretty clean. Fins in good shape with only minor scrapes/chips that are shown in the pictures below. This will fit all 944's that do NOT have an oil level sender. Asking $30 + shipping. 944S intake tube with rubber boots. Part numbers are 944.110.323.05, 944.110.321.02, and 944.110.317.02. All are clean and in good shape. Asking $20 + shipping. I would also be open to separting these parts if necessary. 944S DME (Digital Motor Electronics)part number 944.618.124.02. I did open it to check and it does not have an aftermarket chip in it. Asking $150 + shipping. 944S or S2 AFM (Air Flow Meter) part number 944.606.124.00 (Bosh part number 0 280 203 029). This has been cleaned and lubricated and the contact has been adjusted. I tested it with a volt meter and it is in perfect working order. There is some minor damage to the edge of the plastic cap that was caused by prying it off. This is clearly shown in the pictures. It is purely cosmetic, and does not affect the operation of the unit. Asking $50 + shipping. I also have AFM mounting brackets for both an S and S2 that are both powder coated mirror red. I will include 1 (your choice) for free with the AFM or will sell separately for $20 ea. Shipping cost will be actual cost of shipping (as best I can estiamte using a tape measure, scale, and shipping websites). I usually ship USPS but can ship Fed Ex or UPS if it is cheaper. Please feel free to contact me with any questions or offers. In case anyone was wondering... This stuff is for sale because I decided to go with a Megasquirt engine management computer, MAF or MAP sensor, larger injectors, S2 intake, and oil pan with an oil level sender. Pictures below... Oil Pan    
Last edited by cjpacitto; 02-13-2011 at 01:52 PM.. |
||
02-13-2011, 01:50 PM
|
|
|
Registered
Join Date: May 2009
Location: Sunny SW Florida
Posts: 266
|
944S Intake Tube
  944S DME  944S or S2 Air Flow Meter (AFM)    The top one is for the S2 setup. The bottom one is for an S. 
|
||
|
02-13-2011, 01:51 PM
|
|
|
Registered
Join Date: Sep 2008
Location: NJ
Posts: 113
|
Is the oil pan and windage tray still available? Any cracks in the plastic tray?
PM me with a shipping quote to 08550 if its still for sale. |
||
|
06-25-2011, 12:49 PM
|
|
