Bumper seal

[928 Bro]

Hey guys I'm buy some seals that I need for my exterior. She is finally getting painted. So the bumper seals, rear and front on my car have a gap or have been cut were the hood and trunk close. Is this normal or is the seal suppose to run continuous from one side to another.

[honerboys]

the front is one piece side to side - the rear is two pieces that stop where the hatch opening starts

[928 Bro]

Ok thx. Was wondering because the front was cut. I think I'm good with 9ft of bead seal but I'll measure in the morning.

[Mal81]

Please let us know how it works out - and how much you ended up using. I need to do the same job too.

Thanks!

-M

[Mrmerlin]

Roger sells it and he knows how much you need
roger@************

[MPDano]

Originally Posted by Mrmerlin

Roger sells it and he knows how much you need
roger@************

I believe this is the route I took when I put the seals on my Euro. You'll need a short staple to install. I used my air upholstery stapler.

[928 Bro]

I'm going to have the body shop deal with the install, I just getting them the exterior seals and gasket. I bought 3 meters=9 ft and looks like I have enought