FS: Like New RUF Club Sport Steering Wheel - 911, 930, 928

[petza914]

I'm selling a hard to find, barely used RUF Club Sport Steering Wheel - RUF Part # R64 347 084 01 1AJ. I installed this in my 928 for about a week, but went back to my smaller diameter Momo wheel since it alllows me to set the dash pod a little lower. Wheel is like brand new and will come with all hardware and accessories, incuding the spacer option that allows for some additional clearance between the wheel and your wiper, turnsignal, and cruise control stalks.

Total wheel diameter from outside edge to outside edge is 14.25" or about, 362 mm. It's a nice diameter providing good steering leverage. The grip rim is thick and beefy - 37mm diameter all the way around and slightly thicker 40mm at the 10 and 2 positions. Leather is nice and smooth, but not shiny or slippery. It's a RUF wheel... not much more needs to be said

I have 2 hubs available for this wheel and will include one or the other with the sale. One has the smaller 17.25 mm splined hole for the classic 911s/930 ('74-'89) and the other has the larger splined hole for the 928. Either of these may be compatible with other models as well, but I'm not sure, so do your research first. I will also sell just the wheel without either hub for $50 less if you already have a compatible hub for your model car. The steering wheel itself attatches to the hub using 3 screws so a Momo / Sparco hub with the screw holes around in a circle will not work.

I will include the original RUF box for the wheel but am shipping it fully assembled so you'll be able to take it apart and see how all the parts fit together when you go to install it.

$700 shipped via UPS Ground with tracking & insurance in the Continental US. Outside the US, $700 plus actual shipping costs via USPS with tracking & insurance.

PM or e-mail (petza914@gmail.com) with questions.

[petza914]

Wheel is SOLD,

but without either of the Hubs if someone is looking to install a similar wheel with the 3-bolt hub attachment configuration into a classic 911/930 or a 928. These hubs will run you $110-$135 dollars plus shipping. I'll sell either for $90 shipped. 911 one is totally brand new, never installed. 928 one was installed for a couple weeks, but still looks like brand new.

Hub Part #s:
928 ('78-'95) - 100.498.161.9XA with 21.5 mm splined center hole, horn contact ring, and turn signal cancel tab
911/930 ('74-'89) - 100.498.161.9X1 with 17.25 mm splined center hole, horn contact ring, and turn signal cancel tab

[Garnetredcoupe]

PM sent. Thanks

[petza914]

Both the 928 Hub and the 911 Hub are now SOLD. Thanks.