|
|
|
|
| Author |
|
|
Registered
Join Date: Mar 2003
Location: Near St. Louis
Posts: 175
|
Bench test airbag control unit?
Anyone have a procedure to bench test an airbag control unit? It's from a '91 964 with the loom attached. I would like to test it out of the car. Not with the hammer. Thanks, Roy
__________________
1991 C2 Cabriolet Tip, 1994 Speedster |
||
09-20-2005, 02:08 PM
|
|
|
Registered
Join Date: Feb 2001
Location: Viera FL
Posts: 5,642
|
There is no way to do it safely without a hammer\PST-2\PST-3
In a 964, make sure you aren't getting an airbag light caused by the wiring fault in the clock AFJ
__________________
Es geht nicht darum wie schnell man faehrt, sondern wie gut man schnell fahren kann. Ihr Brunnen der nutzlosen Porsche Information |
||
|
09-21-2005, 06:10 AM
|
|
|
Registered
Join Date: Mar 2003
Location: Near St. Louis
Posts: 175
|
AFJ, This is a unit I acquired while troubleshooting my '91. Someone wants to buy it and I wanted to make sure it was good before I sold it. The buyer says his mechanic can bench test it. Of course I'm reluctant to send this off and let someone test it and possibly ruin it. A local respected shop also said he could only test it in the car with a hammer. I guess I'll try and work something out with the potential buyer. Thanks for the reply. Roy
__________________
1991 C2 Cabriolet Tip, 1994 Speedster |
||
|
09-21-2005, 09:44 AM
|
|
