|
|
|
|
| Author |
|
|
Registered
Join Date: Oct 2006
Location: lake district uk
Posts: 27
|
Temp Switch
Sorry posted in wrong Forum
Hi my cold start on my mfi equipped 911 is not working, I have tested my temp switch the one that is in the breather plate and found that it was reading 24 ohms when cold and switches at 45 deg C but then only reads 39 ohms, I assumed it was faulty because I assumed that it should be a short 0 ohms when cold and open circuit when hot above 45 deg C but I have tested 4 other second hand switches and they are all the same. Does anyone know if my switches are all okay or all faulty? Thanks in advance. Regards
__________________
John 1970 911 2.2E Last edited by johntyboy; 08-03-2007 at 08:26 AM.. |
||
08-03-2007, 08:23 AM
|
|
