|
|
|
|
| Author |
|
|
Registered
Join Date: Nov 2012
Posts: 1,381
|
Oil analysis 1: results
Recently got my oil analyzed by a popular internet-mail-in service. Might have been 3000 mi or closer to 1000 mi, not sure. Castrol GTX 10W-30. Oil-coolant sludge and new cooler seals over 10 years ago. I was inspired by van Svenson using analysis to decide on changing the rod bearings. My total engine mileage is not reliable. Enjoy:
Oil analysis 1: PPM's: Al 3 Cr 0 Fe 4 Cu 2 Pb 0 Sn 0 Mo 17 Ni 0 Mn 0 Ag 0 Ti 0 K 2 B 66 Si 4 Na 61 Ca 2143 Mg 8 P 703 Zn 824 Ba 0 SUS Viscosity at 210degF 57.8 cSt viscosity at 100degC 9.58 Flashpoint (F) 395 Fuel (%) <0.5 Antifreeze (%) 0 Water (%) 0 Insolubles (%) 0.3 |
||
08-05-2016, 09:41 AM
|
|
|
Registered
Join Date: Nov 2012
Posts: 1,381
|
Oh dear, wrong forum! Meh, I'll leave it.
__________________
87 944 NA |
||
|
08-05-2016, 10:45 AM
|
|
