Quote:
Originally Posted by targa80
Frank,
My only goal was to create a schematic for the sole purpose of troubleshooting my module. In order to create that schematic I had to reverse engineer the physical circuit board using the KiCad program and it took many hours over many days to complete. The KiCad program has the capabilities to create the schematic and the design template for the actual PC board that can be manufactured. With additional work on my files they could be used to create a new PC board so I will not be willing to share the actual KiCad files. I can convert them into a PDF file that would be usable as a schematic for troubleshooting and would be willing to email that to you.
|
Targa80,
As you can see in my earlier post (
here ) I am trying to fix my board myself. I am putting my car (85 Carrera) back to full original and after one year of working I have 2 'faults' left : the VDO cruise control not engaging 'on some days' and one headlight washer not working. Trying to do all the work myself, including the electronics.
So a PDF with somewhat higher resolution (readable numbers) would be just fine for me !
I will open my CC box again tonight to get the label on the ZTE diode that you are missing, with some luck it is readable on mine.
Frank